|     		   | 
      
    		THE  USE OF SEISMIC REFRACTION AND ELECTRICAL TECHNIQUES TO INVESTIGATE GROUNDWATER  AQUIFER, WADI AL-AIN, UNITED ARAB EMIRATES (UAE) 
    		Amir  Gabr, Ahmed Murad, Haydar Baker, Khalid Bloushi, Hasan Arman,  Saber Mahmoud 
    		Geology  Department, Faculty of Science, UAEU, Al-Ain, UAE  
    		Abstract 
    		Twenty  seismic refraction profiles, three Vertical Electrical Soundings (VES) and  Three Electrical Resistivity Tomograms (ERT), using Wenner Array were acquired  along Wadi Al-Ain, in order to study the aquifer's geometry, groundwater level and  locate the promising sites for future drilling. The seismic velocities  distribution analysis indicated that, there are three different zones ranging  between (590 – <1400 m/s), (1400 – <1800 m/s) and (1800 – 5300 m/s). The  obtained results show that the first low velocity values may indicate the  unsaturated zone which is directly affected by the surface water 
    				that  appears along the studied area. The second velocity range may reflect the water  level at the saturated zone or the main aquifer. The third range of velocity  reflects the lithological interfaces. The estimated depth to the unsaturated  zone varies between 2 m to 7m. The depth to the saturated zone ranges between  10 m and 15 m. However, the lithological interfaces depths is detected clearly  at 15 m to 25 m. This represents the gradual increase of seismic velocity  layers with depth. This increase may be due to the dense formation which change  vertically from alluvial to compacted sediments 
    				and  then to limestone. The integrated seismic refraction profiles, VES and ERT  results show that the aquifer is a Quaternary alluvial deposits aquifer, which  consists mainly of gravels, sand and clay with average thickness of about 15 m  or more and underlained by compacted sediments and limestone. The apparent  resistivity of the aquifer shows a 
    				surficial  resistive layer of dry alluvium with resistivity of 700 Ω.m  then lower resistivities reach to 5 Ω.m, then  increasing gradually with depth to about 566 Ω.m  or more through 100 m thickness. ERT profiles also confirm the water depths, obtained  from seismic refraction analysis. This integration confirms the existence of a  fresh groundwater within this interval. The obtained results show that any  future drilling for groundwater, a number of the VES positions may be considered  as potential locations. 
    		Keywords: Seismic Refraction, VES, ERT, Groundwater,  Aquifer, Al- Ain
    				Full text  .PDF  |